CZ Type Steel Sandalwood Machine Series

CZ type steel sandalwood machine series

CZ integration

Technical parameters

1. Production product specifications: ①C width (80-300mm), Z width (120-300mm) between arbitrary change

Change; ② Any change between waist height (40-80mm); ③ small side (10-25mm); ④ Plate thickness t

(1.5-3.0mm) adjustable

2. Speed: 20-25 m/min

3. Material application: Q195, Q235 hot rolled strip or hot rolled galvanized strip (1.5-3.0mm)

4. Feed: guide shaft + guide wheel

5. Leveling: three up and four down + two leads

6. Main molding: 18 type, equipped with 13 groups of CZ swap module, rotation 180 degrees can complete the switch, through the electric button to change the size.

7. Pressure rib: straight rib

8. Alignment: ten roller CZ special two-axis alignment + four roller two-axis alignment, a total of two alignment units

9. Lead: with transmission, upper and lower shaft gear drive

10. Punching: punching single hole + punching double hole after forming

11. Roller material: Main roller: GCr15 bearing steel auxiliary side roller: Cr12

12. Spindle: Material: motor drive shaft: 40Cr Other rolling roller shaft: 45#

C-type steel molding machine

By the machine roll C type purlin finished products have good bending and compressive performance, flatness is good, automatic length cutting, automatic punching, high degree of automation, quick and convenient installation.

The product can be used as the main force structure of large and medium-sized industrial civil buildings, such as plant, warehouse, locomotive depot, hangar, exhibition hall, theater, sports venues, market flower shed roof bearing load and wall support.

The machine is mainly composed of feeding rack, feeding platform, leveling device, molding main engine, punching device, flying saw cutting device, hydraulic station, computer control cabinet and other parts.

Main technical parameters

1. Installation size: 13500mm×2200mm×1500mm

2. Number of molding channels: 12

3. Roller material: Gcr15

4. Host power: 11KW

5. Power of hydraulic station: 5.5KW

6. Pressure of hydraulic station: 15Mpa

7. Molding speed: 0-10m/min.

8. Punching material: Cr12

9. Electronic control system: industrial computer PLC frequency conversion control

10. Sheet thickness: 1.5-3.0mm

11. Rolling specifications: 80-300 specifications

12. Sinew Bar (optional)

Z steel molding machine

By the machine roll C type purlin finished products have good bending and compressive performance, flatness is good, automatic length cutting, automatic punching, high degree of automation, quick and convenient installation. The product can be used as the main force structure of large and medium-sized industrial civil buildings, such as plant, warehouse, locomotive depot, hangar, exhibition hall, theater, sports venues, market flower shed roof bearing load and wall support.

The machine is mainly composed of feeding rack, feeding rack base, feeding platform, leveling device, forming main engine, punching device, forming cutting device, hydraulic station, computer control cabinet and other parts.

Main technical parameters

1. Installation size: 13500mm×2200mm×1500mm

2. Molding row number: 14 rows

3. Roller material: bearing steel Gcr15

4. Host power: 11KW

5. Power of hydraulic station: 5.5KW

6. Pressure of hydraulic station: 18-20Mpa

7. Molding speed: 9-10m/min.

8. Cutting tool material: Cr12

9. Electronic control system: industrial computer PLC frequency conversion control

10. Sheet thickness: 1.5-3.0mm

11. Rolling specifications: 80-300 specifications